Autowatch Ghost

Ghost Installation £499

Ghost Immobiliser

An Autowatch Ghost Immobiliser is a covert electronic immobilisation system designed to prevent your vehicle from being driven by an unauthorised person.

Ghost Immobiliser
Ghost Immobiliser installation

What Is a Ghost Immobiliser?

An Autowatch Ghost Immobiliser is a covert electronic immobilisation system designed to prevent your vehicle from being driven by an unauthorised person.

Unlike a conventional immobiliser that relies on a visible alarm or additional remote control, the Ghost is designed to integrate discreetly with the vehicle's electronics.

Once installed, the system can require a personalised disarm sequence using the vehicle's existing buttons before the vehicle can be driven.

This means that even if a thief manages to obtain your vehicle's key or uses electronic theft techniques to gain access to the vehicle, the Ghost provides an additional security layer between the thief and the vehicle being driven away.

The Ghost-II uses the vehicle's CAN bus system and is currently listed by Autowatch as TASSA verified.

The exact Ghost product and installation method required depends on the vehicle, which is why we check compatibility before confirming your installation.

Why Do I Need a Ghost Immobiliser?

Modern vehicles use increasingly sophisticated electronic systems, and vehicle theft has become increasingly technology-driven.

Criminals may use techniques involving keyless entry systems, key cloning, relay attacks, diagnostic equipment and other electronic methods to gain access to and attempt to start vehicles.

Your vehicle's factory security system is designed to provide a level of protection, but adding a professionally installed aftermarket immobiliser gives you another layer of security.

The Ghost is designed to make the vehicle significantly more difficult to drive away without the correct authorisation.

A Ghost Immobiliser can provide additional protection against:

  • Key cloning
  • Relay-style theft
  • Unauthorised vehicle starting
  • Electronic vehicle theft techniques
  • Attempts to bypass the vehicle's original immobiliser
  • Theft following the theft or cloning of vehicle keys
Vehicle security

The Ghost should be considered an additional security layer, rather than a replacement for your vehicle's factory security.

No security product can guarantee that a vehicle will never be stolen, but adding additional layers of protection can make your vehicle a considerably less attractive and more difficult target.

How It Works

How Does a Ghost Immobiliser Work?

The exact operation varies according to the vehicle and Ghost product installed, but the principle is straightforward.

After the Ghost has been professionally installed and configured, your vehicle is assigned a personalised disarm sequence.

On compatible Ghost-II installations, the sequence can be entered using existing vehicle controls such as steering wheel or dashboard buttons.

The vehicle can then be driven normally once the system has been authorised.

Autowatch's current Ghost-II operating instructions describe the process as:

Ignition On Enter Your Unique Sequence Confirmation Start And Drive
Your personalised sequence is not something that needs to be displayed on the vehicle, and there is no requirement for a conventional additional remote control for normal PIN operation.

The Ghost-II also supports smartphone/key-fob functionality on eligible versions, while newer Ghost products offer additional authorisation options depending on the vehicle and system fitted.

Discreet installation

A Hidden Immobiliser With No Obvious Visual Clues

One of the major advantages of a Ghost installation is its discreet nature.

There is no need for a large aftermarket alarm control panel or obvious immobiliser keypad on the dashboard.

The system is installed discreetly within the vehicle and integrated with the vehicle's electronics.

At JB Autowerx, we take this further by carrying out installations with the same attention to detail we would expect on our own vehicles.

We aim to follow the vehicle's existing wiring routes and factory looms wherever possible, using appropriate clips, tape and installation methods to achieve a clean, professional finish.

The objective isn't simply to install the product. It's to install it properly.

Where We Fit

Ghost Immobiliser Installation in Suffolk

JB Autowerx provides Ghost Immobiliser installation throughout Suffolk and selected areas of North Essex.

We offer both mobile installation and workshop fitting, depending on your requirements and vehicle.

Our main service areas include:

Ipswich

We regularly provide vehicle security installations throughout Ipswich and the surrounding areas.

 

If you're searching for a Ghost Immobiliser in Ipswich, JB Autowerx can provide compatibility advice, supply and professional installation.

Across Suffolk

We cover customers throughout:

  • Bury St Edmunds
  • Stowmarket
  • Ipswich
  • Woodbridge
  • Felixstowe
  • Sudbury
  • Hadleigh
  • Diss
  • Needham Market
  • Aldeburgh
  • Shotley
  • Claydon
  • Capel St Mary
  • Kesgrave
  • Martlesham
  • Ufford
  • Southwold
  • Bawdsey
  • Holbrook

North Essex

We also provide installations for customers around:

  • Colchester
  • Manningtree
  • Dedham
  • East Bergholt
  • Capel St Mary
  • Surrounding North Essex areas

Ghost Immobilisers for High-Risk & High-Value Vehicles

Some vehicles are particularly attractive to organised vehicle thieves.

For owners of desirable, high-value or frequently targeted vehicles, relying solely on the factory security system may not provide the level of reassurance they want.

We regularly recommend considering additional vehicle security on vehicles including:

  • Range Rover
  • Range Rover Sport
  • Land Rover Defender
  • Toyota
  • Lexus
  • BMW
  • Mercedes-Benz
  • Audi
  • Porsche
  • Volkswagen
  • Performance and high-value vehicles
High value vehicle security

Range Rover, Toyota and Lexus vehicles in particular are among the vehicles for which owners frequently seek additional security.

The right security solution depends on the individual vehicle, its existing security systems and the way it is used.

That's why we don't take a one-size-fits-all approach.

Range Rover and Land Rover

Ghost Immobiliser for Range Rover & Land Rover

Range Rover and Land Rover owners are increasingly conscious of vehicle theft and electronic attack techniques.

A Ghost Immobiliser can provide an additional layer of protection by requiring authorisation before the vehicle can be driven.

For suitable vehicles, this can provide valuable protection alongside the manufacturer's existing security.

We can assess your exact Range Rover, Range Rover Sport, Defender or other Land Rover model and advise which Ghost solution is appropriate.

Toyota and Lexus

Ghost Immobiliser for Toyota & Lexus

Toyota and Lexus vehicles are also popular candidates for additional aftermarket security.

If you own a Toyota or Lexus and are concerned about vehicle theft, a Ghost installation can add another layer of protection beyond the vehicle's original security system.

Because vehicle electronics and compatibility vary between models and model years, we will check the exact vehicle before recommending a system.

The Range

Which Ghost Immobiliser Is Right for My Vehicle?

We supply the Autowatch Ghost range, including:

Autowatch Ghost-II

Autowatch Ghost-II

The Ghost-II is an established CAN-bus immobiliser designed to prevent unauthorised vehicle use through a personalised disarm sequence.

It is currently listed by Autowatch as TASSA verified and supports a wide range of vehicle makes and models.

Key features include:

  • Personalised disarm sequence
  • Uses vehicle controls
  • Covert installation
  • CAN-bus integration
  • Service/Valet mode
  • Smartphone functionality on eligible installations
  • Emergency override procedure
  • No conventional additional RF remote required for normal PIN operation
Ghost Pro

Ghost Pro

For vehicles where the standard Ghost-II isn't the appropriate solution, Autowatch's Ghost Pro range provides alternative functionality and compatibility.

The exact system recommended depends on the vehicle's electronics and the requirements of the installation.

Ghost Pro FD / Ghost-III

Ghost Pro FD / Ghost-III

Newer vehicles increasingly use high-speed CAN-FD networks.

Autowatch's current Ghost-III / Pro FD platform is designed for modern vehicle architectures and supports CAN-FD, with digital engine blocking through CAN/LIN and, where required, traditional circuit immobilisation.

It also supports authorisation through combinations of PIN, key-tag and smartphone functionality depending on the installation.

This makes selecting the correct product particularly important on newer vehicles.

We will check your vehicle before recommending the appropriate Ghost system.

Optional Upgrade

Ghost Bluetooth Siren – Optional Upgrade

For customers who want additional audible protection, we can also supply the Autowatch Bluetooth Siren as an optional addition.

The siren can complement your Ghost installation by adding an audible security element.

This is an optional extra and is not included in the £499 Ghost installation price.

If you would like the additional audible protection, simply mention this when submitting your enquiry.

Compare

Ghost Immobiliser vs a Tracker

A common question is whether you need a Ghost Immobiliser or a vehicle tracker.

The two systems perform different jobs.

Ghost Immobiliser

Designed to help prevent the vehicle from being driven away.

Vehicle Tracker

Designed to help locate the vehicle if it is stolen.

For higher-value vehicles, combining both technologies can provide a much stronger overall security strategy.

A Ghost can provide an additional barrier against unauthorised use, while a tracker can provide location and recovery capabilities.

At JB Autowerx, we can also supply and install Thatcham-approved tracking systems, allowing us to build a security package around your vehicle rather than simply selling you one product.

Why JB Autowerx

Why Choose JB Autowerx for Your Ghost Installation?

Choosing the product is only part of the decision.

The quality of the installation matters too.

At JB Autowerx, we specialise in vehicle security and provide professional installation across Suffolk and North Essex.

Experienced automotive installer

Experienced Automotive Installer

Our automotive background means we understand vehicle construction, factory wiring systems and the importance of carrying out modifications carefully.

TASSA verified

TASSA Verified

We are experienced in installing security products to the required standards and are able to provide TASSA-related installation support where applicable.

AVI member

AVI Member

JB Autowerx is also an AVI member, reflecting our involvement within the professional automotive aftermarket.

Clean professional installation

Clean, Professional Installation

We don't want aftermarket wiring and components unnecessarily visible.

Our installations are designed around the vehicle, with wiring routed and secured professionally and integrated into the existing vehicle loom where appropriate.

Pre and post installation checks

Pre & Post Installation Checks

Before completing an installation, we check the vehicle's electrical systems and relevant functions.

Following installation, we carry out further checks to make sure the vehicle is operating correctly.

Mobile or workshop installation

Mobile or Workshop Installation

Depending on the vehicle and installation requirements, we can come to you or carry out the installation at our workshop.

Customer Handover

Once the installation is complete, we'll demonstrate the system and make sure you understand how to operate it before you leave.

If you're outside these areas, contact us with your location and vehicle details and we'll let you know whether we can help.